Ulti-MATE PRO GA-RCS14 Rolling /Locking Casters - Set of 4
Ulti-MATE Garage PRO heavy duty rolling/locking caster set gets your Ulti-MATE Garage PRO base cabinets mobile. Suggested use on PRO models GA-01PC, GA-02PC, GA-03PC & GA-04PC but can be used on any other solid cabinet as well. Two freely pivot and two are locking.
INSTALLATION NOTES: Always install the Locking casters onto the front of the cabinet for easier operational access. Due to the wide variety of applications under which these casters are used, no mounting screws are provided. You will need to purchase these locally as required per your specific cabinet application. Purchase screws that will not go all the way through cabinet bottom when completely tightened. If your cabinet currently has feet then remove those first. Place a caster in each corner of your cabinet bottom and then mark all hole positions with a pencil. Drill a small pilot hole at each mark and then screw caster to bottom of cabinet. Make sure you don't drill or install screws all the way through cabinet bottom!
