69Vette
1 post
30-May-2006
6:55 AM
|
Anybody got any suggestions/ideas on how to best store some folding tables? I have four of these about 5 feet long and 32 inches wide. We use them once or twice a year and they are currently stacked against the wall which seems like a waste of space.
|
Flintlock
1 post
2-Jun-2006
6:58 AM
|
Depends on your garage layout. I have a fireplace that pushes out into the garage area. This leaves an indented space on one side which is perfect for stacking these types of tables. A more universal solution would be to install a couple of overhead storage units on your ceiling and then slide the tables onto those. Mount these over your garage door if you have enough clearance. They even make some that can be raised and lowered so you won't need to use a ladder.
Good luck!
Flintlock
|
69Vette
2 post s
9-Jun-2006
9:46 AM
|
Flintlock,
Thanks for the suggestions. I don't have a built in alcove but the overhead solution sounds great. I'm debating about building my own units or ordering a couple of the kits shown on this website. It doesn't seem like it would be that hard to build but then I would have to consider my time to design, cut, etc. I guess I should ask the lady of the house. She always has the final word anyway! lol!
|
Connie
1 post
26-Jul-2006
3:15 PM
|
We have two of these tables and I just slide them underneath the bed. They don't get as dusty as in the garage and are closer to retrieve when setting up for extra guests. I don't believe you could get 4 or 5 under there but if you have more than one bed you should be able to work it out. You gotta have enough clear floor space to get them in and out though. Connie
Last Edited Connie on 26-Jul-2006 3:16 PM
|
69Vette
4 post s
21-Sep-2006
5:34 AM
|
Just a follow up to let you know I ended up building my own storage brackets out of two by fours. I simply made two "U" shaped brackets with the bottom piece 36 inches wide and the sides 18 inches tall. These were then secured to the ceiling joists above the garage door using metal "L" brackets. I then added a few 1" by 2"'s between the two units to increase stability and add a "floor" to the system. This helps to prevent accidental drops. The whole thing cost less than $20 and took about an hour to build. It's not the best looking system but is highly functional. Nobody can see up there anyway when the garage door is open.
Last Edited 69Vette on 21-Sep-2006 5:39 AM
|
ken
1 post
10-Nov-2006
11:07 AM
|
for the guy wanting to store the tables. Use the new Crawford OH2 Overhead storage system. Its tubular steel and suspends from the ceiling joints. One pair will easily store the tables.
|
BoCRon
1 post
26-Nov-2006
8:02 PM
|
ken, do you have a link for the Crawford system? Also, I think the racor heavy duty hoist would be the best solution. It is rated for 250lbs, so you would have to check the weight of 5 tables. Annette
|
